Name: Newmar 12-12-35I DC Converter
SKU: V97180634066
Availability: InStock

No products in the cart.

Newmar 12-12-35I DC Converter

Home
Newmar 12-12-35I DC Converter

Newmar 12-12-35I DC Converter

In Fishing Rods2

~~$475.00~~ $142.50

SKU: V97180634066

Availability: In stock

12-12-35I DC ConverterThis isolated series provides voltage conversion as well as input/output isolation, allowing the use of negative ground gear in positive or floating ground battery systems, or vice versa.Using an isolated converter as a voltage stabilizer on 12- or 24-volt systems can solve conducted noise and interference problems on sensitive DC-powered communication, navigation systems, and DC microprocessor-based devices.Features:Wide range of input voltagePrecise output voltage regulationReverse polarityInput fuse/output fuseTotal input/output isolation, pos. or neg. groundCurrent-limiting, short-circuit-proof outputAutomatic resetting of the thermal shutdownHigh/low input voltage shutdownPolyurethane conformal coating on PC boardPower ON lightRugged case designed for high-vibration applicationsSpecifications:Input Voltage: 10-16Max Input Amps: 56Output Voltage: 13.6Output Amps (Intermittent): 35Output Amps (Continuous): 20Case Size (H x W x D): 6 x 6.8 x 16.5 inches (15.2 x 17.3 x 41.9 centimeters)Weight: 12 lb. (5.5 kg)Output: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)Ripple: 150 mV P-P maximumRegulation: 1% Line/LoadDuty Cycle Ratings: Intermittent 20 minutes max on time, 20% duty. current limit set at approx. 105% of the intermittent rating. Continuous 24 hours, 100% dutyIdle Current: Less than 100 mA (including power ON light )Operating Temp: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case TemperatureSwitching Frequency: 40 kHzEfficiency: 85% TypicalIsolation Output/Chassis; Input/chassis: 250 VDCMechanical Specifications:Anodized aluminum heat sink caseFront panel terminal blockHeavy-duty mounting flangeconformal-coated PC boardOptions:Operation as battery charger or parallel redundant operation* derate to continuous duty rating (contact factory)Extreme vibration mounting kit. (Information below)Option: Extreme Vibration Mounting KitThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles.The kit replaces the standard vibration kit provided with the unit and fits into the units mounting flange to act as a super shock absorber for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify Kit L for units that weigh 2 -15 lbs. and Kit H for units that weigh 16 70 lbs.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.