Name: Victron Lynx Smart BMS 1000 NG (M10) MGMT System
SKU: V97180632988
Availability: InStock

No products in the cart.

Victron Lynx Smart BMS 1000 NG (M10) MGMT System

Home
Victron Lynx Smart BMS 1000 NG (M10) MGMT System

Victron Lynx Smart BMS 1000 NG (M10) MGMT System

In Fishing Rods2

~~$410.00~~ $123.00

SKU: V97180632988

Availability: In stock

Lynx Smart BMS 1000 NG (M10) MGMT SystemThe Lynx Smart BMS NG is a dedicated Battery Management System (BMS) designed specifically for the Victron Lithium NG batteries. These batteries utilize Lithium Iron Phosphate (LiFePO4) technology and are available in 12.8 V, 25.6 V, and 51.2 V variants with various capacities. They can be configured in series, parallel, and series/parallel arrangements, allowing for the creation of battery banks with system voltages of 12V, 24V, or 48V. The maximum number of batteries in a single system is 50, enabling a maximum energy storage of 192kWh in a 12V system and up to 384kWh in a 24V and 48V system. For comprehensive details about these batteries, visit the Victron Lithium NG battery product page.Out of the various BMSes available* for the Lithium NG batteries, the Lynx Smart BMS NG is the most feature-rich and complete option and integrates seamlessly with other M10 products in the Lynx Distributor system. It is available in 500 A (M10) and 1000 A (M10) versions1).Built-in 500 A or 1000 A ContactorLynx Smart BMS NG 500A A Lynx Smart BMS NG 1000AAvailable in 500 A (M10) and 1000 A (M10) versionsActs as a secondary safety system to protect the battery in case primary controls (ATC, ATD, and/or DVCC) failSuitable as a remote controllable main system switchPre-charge CircuitPrevents high inrush currents when connecting capacitive loads like invertersEliminates the need for external pre-charging devicesMonitoring & ControlBluetooth connectivity for monitoring and control via the VictronConnect App or VE.Can connectivity in combination with GX devices such as the Cerbo GX or Ekrano GX and the VRM portalReadout of cell voltages and temperatures also on GX devices and the VRM portalBuilt-in battery monitor provides data such as state of charge, voltage, current, historical data, status info, and more in real-timeDiagnostic at a glance with Instant ReadoutDVCC Closed Loop Control as well as ATC/ATD ContactsCompatible Victron inverter/chargers, the Orion XS 12/12-50A DC-DC battery charger, and solar charge controllers are automatically controlled via a connected GX device and DVCC.ATC/ATD contacts can be used to control other chargers and loads that have a remote on/off portProgrammable RelayCan be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external regulator (ignition cable)Features Alternator ATC mode for safe alternator disconnection before battery disconnectsAUX TerminalOnboard auxiliary power supply (1.1 A @ system voltage) for powering specific loads (i.e. a GX device) post-BMS shutdownAutomatic shutdown of BMS and AUX connection if no charge voltage is detected within 5 minutes after a low voltage eventVE.Can and NMEA 2000 Data CommunicationEasy connection and communication with GX devices via VE.Can using a standard RJ45 network cableIntegration into marine networks via NMEA 2000 protocol (requires a VE.Can to NMEA 2000 micro-C male cable)Lynx Distributor Fuse MonitoringMonitor fuse status of up to 4 connected Lynx Distributors via VictronConnect or GX devicesReceive alarms in case of blown fuses1) Up to 5 BMS-es can be paralleled. This requires a firmware update, expected in Q3 2024.SpecificationsPower:Battery Voltage Range: 9 60 VDCMaximum Input Voltage: 75 VDCSupported System Voltages: 12, 24, or 48 VReverse Polarity Protection: NoMain Safety Contactor Continuous Current Rating: 1000 A continuousMain Safety Contactor Peak Current Rating: 1200 A for 5 minutesPower Consumption OFF Mode: 0.3 mA for all system voltagesPower Consumption in Standby Mode: Approximately 0.6 W (50 mA at 12 V)Power Consumption in ON Mode: Approximately 4.2 W (350 mA at 12 V) depending on the state of the relaysMinimum Load Resistance for Pre-Charging: 10 and above for 12 V systems 20 and above for 24 V and 48 V systemsAUX Output Maximum Current Rating: 1.1 A continuous, protected by resettable fuseAllow-to-Charge Port Maximum Current Rating: 0.5 A at 60 VDC, protected by resettable fuseAllow-to-Discharge Port Maximum Current Rating: 0.5 A at 60VDC, protected by resettable fuseAlarm Relay (SPDT) Maximum Current Rating: 2 A at 60 VDCConnections:Busbar: M10 (Torque: 33 Nm) can be combined with all M10 Lynx productsVE.Can: RJ45I/O: Removable multi-connector with screw terminalsBattery BTV Cables: Male and female circular 3-pole connector with M8 screw ring Up to 50 batteries can be connected in one systemLynx Distributor Fuse Monitoring (up to 4 modules): RJ10 (cable ships with each Lynx Distributor)Physical:Enclosure Material: ABSEnclosure Dimensions (H x W x D): 230 x 180 x 100 mmUnit Weight: 2.7 kgBusbar Material: Tinned copperBusbar Dimensions (H x W): 8 x 30 mmEnvironmental:Operating Temperature Range: -40 C to +60 CStorage Temperature Range: -40 C to +60 CHumidity: Max. 95 % (non-condensing)Protection Class: IP22Standards:Safety: EN-IEC 63000:2018EMC: EN-IEC 61000-6-3:2007/A1:2011/AC:2012QMS: NEN-EN-ISO 9001:2015Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner’s Manual (pdf)